INLINE CLOSURE
TGJS303 96 CORE FIBER OPTIC SPLICE CLOSURE
TGJS 303 96 CORE FIBER OPTIC SPLICE CLOSURE
1. General Introduction
TGJS-303 is designed to seal without screws. The compact size and flip-over cover bring easy operation as well as complete function.
The splice trays are jointed with a hinge at one side, which makes the operation in each tray easier. It is designed to prevent from operation damage.
2. Specification
Dimension（mm） | 380×245×130 | Max. capacity(Single fiber) | 16 |
Weight（kg） | 4.5~5 | Sealing type | Mechanical |
Cable ports | 1 input cable port for un-cut cable from diameter from10~17.5mm. 2 output cable ports for cable diameter from 8~17.5mm. 16 output cable ports for cable diameter less than 4mm. | Single splice tray capacity(Single fiber) | 16 |
Splice tray quantity | 2pcs |
3.Structure
3.1 Closure and accessories
3.2 Parts list
3.2.1 Main kits
S/N | Description | Quantity | Note |
1 | Lid | 1 | 337(L)×242(W)×63(H)mm. |
2 | Base | 1 | |
3 | Sealing ring | 1 | Box sealing |
4 | 8202 sealing parts | 16 | Sealing cable ports |
5 | Splice tray | 4 | For cable splicing and storage |
6 | Splice tray cover | 1 | |
7 | Splice tray bandage | 1 | Fixing several splice trays |
8 | Fastener bolt | 2 | Fixing lid and cover of closure |
9 | Buckle | 4 | Fixing lid and cover of closure |
10 | Tight nuts | 16 | Sealing soft cable ports |
11 | Tight tool | 1 | Special for tight the nuts |
12 | Cable fixing panel | 1 | Fixing un-cut cable |
13 | Adaptor installation panel | 4 | An adaptor panel for 6 SC simplex adaptors |
14 | Splice tray bracket | 1 | Install 4 splice trays |
15 | Top cover stopper | 1 | Limit top cover |
16 | Plastic nuts | 2 | Fixing cable |
S/N | Description | Quantity | Note |
17 | Wall mounting kit | 1 | For wall mounting |
18 | Expansion anchor bolt | 2 | Parts of the wall mounting kit |
19 | Hexagon bolt | 2 | Parts of the wall mounting kit |
20 | Nylon tie（3*120mm） | 12 | Fixing cable |
21 | Fusion sleeve(Φ1.0*60mm) | According to the fiber cores. | Cable splicing |
22 | 0.2m coil tube | 1 | Protect the fiber |
23 | Insulation tape | 1 | Accessorial fixation |
24 | 0.5m EVA tube | 1 | Protect fiber |
25 | Drier | 1 | |
26 | M6 internal hexagonal wrench | 1 | Tool to open the box |
27 | 14# grommet | 2 | For cable dia. From 12-17.5mm |
28 | 41# grommet | 2 | For cable dia. From 8-12mm |
29 | Plastic plug | 4 | Seal the cable port |
30 | Iron spanner | 1 | Tool |
3.2.3 Optional parts
S/N | Description | Quantity | Note |
25 | Pole mounting kit | 1 | For pole mounting |
26 | Valve | 1 | Testing sealing performance |
4. Installation instruction
1. Transverse cutting knife for cable outer security layer.
2. The longitudinal open cable knife.
3.3. Steel core cut clamp.
4.4. Cross screwdriver.
5.5. M6 hexagonal socket wrench.
6.6. Scissors.
7. Cutting clamp
7. Main technical data.
7.1 Environmental temperature：-40℃～+65℃
7.2 Optical performance: No significant additional attenuation.
7.3 IP68
8. Packing, transportation and storage
8.1 This equipment packaging is moisture-proof and earthquake-proof. The accessories are packed first plastic bags, then into the boxes with plastic bags for sealing. There are moisture-proof and earthquake direction signs outside the boxes.
8.2 It can’t be inverted in the transport and be free from rolling when carrying. Please load carefully and prevent the collision. You should prevent it from heavy rain before installation. The temperature in the transport should be controlled between-35℃ to +55℃.
8.3 The excessive accumulation of goods should be stored on the cartons. The treasury should away from the erosion of corrosive gas equipment and the temperature should be below 45℃ and higher than -5℃, and relative temperature should not be high in long-term(generally less than 75%).
Related Products
TGJS303 96 CORE FIBER OPTIC SPLICE CLOSU
CT011 FIBER OPTIC INLINE 96 CORE SPLICE
CT010 FIBER OPTIC INLINE 96 CORE SPLICE